Merry Christmas Stenciled Wall Sign (Silhouette/Cricut)

More holiday decorations today. After slacking off the last couple of years, I vowed that this year I would complete all of the crafty projects I have saved up.

I made this sign for my house back in October and I've been waiting so impatiently to share it with you! The build is pretty easy - the most time-intensive part is placing the stencil.

You will need:

1 - 1x12 board - 42" long
2 - 1-1/4 x 3/8 trim pieces - cut at 45 degrees - 42.75" longest point to longest point
2 - 1-1/4 x 3/8 trim pieces - cut at 45 degrees - 12.75" longest point to longest point

Also:

Merry Christmas stencil (cut with Silhouette/Cricut/by hand)
Paint/stain
Brad nailer and brad nails or driver and screws
Miter saw
French cleat for hanging (optional)

Cut your sign board and sand it smooth on the face and edges. Cut your trim strips for the border at a 45 degree angle.

Paint one side of the board in your chosen colour. I mixed BM Edgecomb Gray with plain white paint to lighten it up. Stain your trim pieces in a contrasting colour. I chose Minwax Jacobean.

I used my Silhouette Cameo cutter to cut the words from vinyl. The font type is called Harrington. My vinyl is only 12" wide so I had to cut the words out in pieces, a few letters at a time.

Once you have your stencil cut, arrange it on your sign board so that the spacing is even. My vinyl is peel and stick, so the letters stay securely in place.

A trick to keep your letters sharp is to paint along the inside edges of the letters in your background colour first. This forms a seal to keep your top colour from bleeding around the edges.

I painted the letters with dark brown poster paint - several thin coats, letting it dry completely between coats.

Once your letters are completely dry, peel off your stencil and do any touchups necessary. Nail your trim pieces onto the edges of the board, keeping them flush with the back and with a slight overhang at the front. Squeeze or clamp them tightly together when you nail the corners.

I hung the sign in the living room above our stockings. It perfectly frames the opening to the kitchen and it's the first thing you see when you come in the house. It's hung with a French cleat - very secure and the weight is evenly distributed.

Holiday Wreaths

A cheery front door just sets the tone for the rest of the house. Today I'd like to share with you a roundup of holiday wreath ideas. Some are my own and some are beautiful creations I've found around the internet. Click on any photo to go to the original post.

This simple wreath is made entirely of items you can find at the dollar store. The cinnamon pine cones ensure that a lovely scent greets you right from the start. I made this wreath several years ago and still bring it out year after year.

This wreath has a deceptive simplicity. The more you look at it, the more details you discover. There are at least six different types of greenery, and the white stems and red berries tie it all together.

via Cotton Stem

This wreath started out with just greenery and pinecones. I gave it a boost by weaving in strips of burlap and bunches of green berries.

Your wreath doesn't always have to be on the front door. This pinecone-heavy wreath gets lightened up with the addition of snowball ornaments plus gold and burlap ribbons. The window frame turns it into a holiday vignette. This was my absolute favourite wreath display and I miss having a fireplace to decorate.

This wreath goes heavy on the greenery and has a lovely country farmhouse feel. If you're lucky enough to have a wooded area nearby, you can collect your own branches and pinecones.

via Clean & Scentsible

Sometimes a wreath goes through many adjustments before its final incarnation. This one started out as a pool noodle. I loosely wrapped burlap around it like a sock and used it for an autumn wreath. For Christmas, I attached soft garland, pinecones, and ribbon. The final touch was a set of sleigh bells.

One last wreath. I adore this bright and shiny ornament wreath. Buy inexpensive plastic balls so that you don't have to worry about it getting bumped and breaking. Use ornaments with different sheens and textures to give a natural look.

via Sarah Catherine Design

DIY Holiday Tree Wall Shelf

I want to share a Christmas woodworking project with you today - this adorable tree-shaped wall shelf!

My inspiration comes from Jaime Costiglio, and her inspiration came from Pottery Barn Kids - apparently you could buy something similar a few years ago for $79! Mine cost a whopping $7 for the hooks because I used discarded pallet wood plus stain that I already had in my stash.

The plans can be found on Ana White's site - she has excellent drawings that show more than my photos can.

Here is the cut list, directly from her site:

TRUNK
1 - 1x4 @ 16-1/4" 

2 - 1x4 @ 3-1/2" 

MAIN TREE

1 - 1x4 @ 18-3/4" longest point to longest point both ends cut at 25 degrees off square

6 - 1x4 @ 7-1/2" long point to short point, both ends cut at 25 degrees off square

1 - 1x4 @ 15-1/8" longest point to longest point both ends cut at 25 degrees off square

1 - 1x4 @ 11-3/8" longest point to longest point both ends cut at 25 degrees off square

TREETOP

1 - 1x4 @ 7-3/4" long point to long point, both ends cut at 30 degrees off square

1 - 1x4 @ 8-5/8" long point to long point, both ends cut at 30 degrees off square

1 - 1x4 @ 9-1/2" long point to long point, both ends cut at 30 degrees off square

Scrap 1/2" plywood for filling in second shelf approximately 6" x 15"

You will also need:

1-1/4" brad nails and nailer (air nailer), or screws and a drill/driver
3 hooks
wood stain or paint


I usually cut and assemble as I go, just to make sure it fits together. But this time I made all my cuts first, and these measurements were spot on.

Start your assembly from the bottom, attaching the two side supports of the "trunk" to the back. The supports attach to the outside edges of the back piece, not to the front of it (A mistake I made the first time. Because of this I had to cut down the supports as they stuck out the front.)

You then build upwards, starting with the longest board for the main tree. Nail or screw it directly on top of the three-sided trunk you've built already. Follow this with two angled side boards, attached to the long board on the outer edges.

Then the middle board, two sides, the top board, and two more sides.

The treetop fits together kind of like a puzzle. I'm going to refer you to Ana's drawing again.

The final step before hanging is to attach a thinner piece of wood to the back to give you a place to mount it to the wall. I took a thin strip of scrap wood - about the size of a paint stirrer, put it across the back of the tree, traced the angles, and cut it to size. I then attached it to the tree with brad nails.

I stained the tree shelf with Minwax's Provincial stain and a soft cloth. I might also wax it but I haven't decided yet.

And there's your tree! Attach your hooks along the face of the trunk with 1/2" screws.

The decorations I used were scrounged from the ornament boxes. The two little trees were made from scraps from another project. I made them back when I was afraid of the power tools and just put them together with hot glue! The pine cones are from our property - the top one has glitter on it and is from this mantel project.

I can't decide if I'm going to hang our stockings from this shelf. But with six of us and only three hooks, there might have to be some sharing going on. Maybe I should build another shelf!