Merry Christmas!

Merry Christmas from all of us at Turtles and Tails!

Chocolate Crinkle Cookies (with a twist!)

One more recipe before Christmas. These Chocolate Crinkle Cookies are like a brownie, with just the right amount of sweetness (and a little surprise kick!)

Ingredients

1 cup flour
1/2 cup unsweetened cocoa powder
1 teaspoon baking powder
1/4 teaspoon salt
3/4 cup sugar
1/4 cup vegetable oil
2 large eggs
1 teaspoon vanilla extract
1/4 teaspoon cinnamon (optional)
pinch of cayenne powder (optional)
1 cup icing sugar, for coating the cookies


In a small bowl, whisk together the flour, cocoa powder, baking powder, and salt. For a Mexican twist, add the cinnamon and cayenne powder. Set mixture aside.

In a large bowl beat the sugar and oil until light and fluffy. Add in the eggs and vanilla. Gradually add in the flour mixture and mix until just combined.

Form the dough into a large ball and wrap it in plastic wrap so that it is sealed tightly.  Refrigerate for at least 2 hours.

Preheat the oven to 350°F.  Fill a small bowl with the powdered sugar.

Form 1-inch round dough balls by hand or with a cookie scoop.  Dip each dough ball in the powdered sugar until it is completely covered on all sides, and then place them on a parchment-lined cookie sheet.

Bake the cookies for 10-12 minutes until nicely puffed up and crinkled. Remove from the oven, and let cool completely on the cookie sheet or a wire rack.

Christmas Decor - Inside and Out

As in previous years, I took a walk out to the woods at the back of our property last weekend to gather branches to make a decorative planter for the front door.

I was lucky this year to find four different types of evergreen trees, along with dogwood, birch, and pine cones. I dragged my haul back to the house and laid it out in the basement to dry for a day.

The planter I use is already 3/4 full of soil as there are live plants in it during the rest of the year. I put scrap 1x6 pieces over the dirt to get a level surface and then added 3 florist foam bricks on top to anchor the branches.

My method is to start with birch along the back, then pine branches fanned out in front of them. I position cedar along the front edge as it drapes down nicely. I then randomly fill in the open space using all four of the different types. Finally I add in the decorations. This year I chose baubles and faux iced berries that I purchased during a Christmas open house at Bradford Greenhouses. I also added in dogwood branches for colour (love how it turns bright red in the winter!) and white poinsettia flowers.

On the door, instead of a wreath, I hung a rustic window frame that I also purchased at the open house. It has a metal wreath and stylized reindeer in the center. I added a big red bow to make it pop.

Inside, we have several areas of the house with vignettes. Our stocking wall is getting very full - with two new dogs this year we now have 6 stockings! Above the stockings is the Merry Christmas sign I made with my Silhouette cutter and scrap wood.

I would love to show off our tree, but it's been through an ordeal this year. The little dogs won't leave it alone so it's been stripped of ornaments along the bottom, and has been relegated to the dining room where it's safer. Maybe next year...

Christmas Snowball Cookies (Egg Free)

I'm determined to make a wide variety of cookies this year, even if it means cutting back on sleep. Raise your hand if you've made shortbread dough at 5 in the morning! Sometimes you do what you have to do.

First up: Christmas Snowball Cookies. These have a texture like shortbread and melt in your mouth. And they don't need eggs or baking soda/baking powder, so if you find yourself running short, they're the perfect solution.

Ingredients

1 cup of butter, softened slightly
1/3 cup of sugar
2 teaspoons vanilla extract
¼ teaspoon salt
2 cups of flour
2 cups of finely chopped walnuts or pecans
1½ cups of icing sugar (i.e. powdered sugar or confectioner's sugar) for dusting cookies

Cream together butter and sugar. Add in the vanilla and salt. Gradually add flour, mixing well. Stir in the nuts until evenly distributed. Wrap the dough in plastic food wrap and refrigerate for at least 45 minutes.

Preheat oven to 350ºF.  Scoop out dough balls using a small cookie scoop or teaspoon. Roll the dough between your palms to make a round ball.

Place the cookies on parchment lined baking sheets. Bake until they are just beginning to brown, approximately 12 to 14 minutes.  The underside of the cookies should be only lightly browned.

Cool cookies on baking sheets for about 2 minutes - they should still be warm to the touch. Gently roll the cookies in a bowl of icing sugar.

Place the sugar-coated cookies on wire racks or back on the pans to cool completely. Once cool, roll the cookies in icing sugar one more time.

Makes about 6 dozen cookies.

4x4 Wooden Snowmen

The town resurfaced our road this summer and that extra layer of asphalt they put on was enough such that our mailbox was now too low by postal standards. We had to replace the 4x4 post, so the old one went into the scrap wood bin until I could make these adorable 4x4 fence post snowmen.

To make one you will need:

3' of 4x4 fence post
white, black, & orange paint
scrap fabric
yarn
buttons
miter saw
hot glue gun


Cut your post into three pieces. It's up to you if you want your snowmen to be all the same or different heights. I randomly cut the post lengths without measuring, and ended up with pieces that were 9-1/2", 11-1/2", and 13-1/2" long.

I wanted a flat paint finish for the snowmen bodies, so I chose white ceiling paint, and rubbed it on with a cloth to give it just a light washed look.

Once the white paint was dry, I used poster paint to add the eyes, nose, mouth, and buttons. I used a fairly wide artist's brush which gave the features a more rustic, cartoonish look instead of being sharply defined.

You can use any type of fabric you want for the hat and scarf. I used scraps of flannel left over from the receiving blankets and stuffed animal I made for my cousin's baby.

Cut a fabric rectangle measuring 10"x15". Fold the fabric over twice - about an inch - on the long side to create the brim of the hat, and wrap it around the top of the post, just above the eyes. Glue one end of the rolled edge of the hat to the post at the back, then fold over the other end and glue it to the first edge.

Gather the top of the hat together and tie it off with yarn. Floof the top of the hat like a pompom.

Take another scrap of fabric, 17" long and about 1" wide, and wrap it around the post at the neck. I picked fabric for the scarves that didn't quite match the hats because, when we go out to play in the snow we don't worry about matching, we just make sure we're warm. Crisscross the scarf fabric and secure in place with a dot of hot glue. Glue a button where the two ends cross.

And you're done!

Merry Christmas Stenciled Wall Sign (Silhouette/Cricut)

More holiday decorations today. After slacking off the last couple of years, I vowed that this year I would complete all of the crafty projects I have saved up.

I made this sign for my house back in October and I've been waiting so impatiently to share it with you! The build is pretty easy - the most time-intensive part is placing the stencil.

You will need:

1 - 1x12 board - 42" long
2 - 1-1/4 x 3/8 trim pieces - cut at 45 degrees - 42.75" longest point to longest point
2 - 1-1/4 x 3/8 trim pieces - cut at 45 degrees - 12.75" longest point to longest point

Also:

Merry Christmas stencil (cut with Silhouette/Cricut/by hand)
Paint/stain
Brad nailer and brad nails or driver and screws
Miter saw
French cleat for hanging (optional)

Cut your sign board and sand it smooth on the face and edges. Cut your trim strips for the border at a 45 degree angle.

Paint one side of the board in your chosen colour. I mixed BM Edgecomb Gray with plain white paint to lighten it up. Stain your trim pieces in a contrasting colour. I chose Minwax Jacobean.

I used my Silhouette Cameo cutter to cut the words from vinyl. The font type is called Harrington. My vinyl is only 12" wide so I had to cut the words out in pieces, a few letters at a time.

Once you have your stencil cut, arrange it on your sign board so that the spacing is even. My vinyl is peel and stick, so the letters stay securely in place.

A trick to keep your letters sharp is to paint along the inside edges of the letters in your background colour first. This forms a seal to keep your top colour from bleeding around the edges.

I painted the letters with dark brown poster paint - several thin coats, letting it dry completely between coats.

Once your letters are completely dry, peel off your stencil and do any touchups necessary. Nail your trim pieces onto the edges of the board, keeping them flush with the back and with a slight overhang at the front. Squeeze or clamp them tightly together when you nail the corners.

I hung the sign in the living room above our stockings. It perfectly frames the opening to the kitchen and it's the first thing you see when you come in the house. It's hung with a French cleat - very secure and the weight is evenly distributed.

Holiday Wreaths

A cheery front door just sets the tone for the rest of the house. Today I'd like to share with you a roundup of holiday wreath ideas. Some are my own and some are beautiful creations I've found around the internet. Click on any photo to go to the original post.

This simple wreath is made entirely of items you can find at the dollar store. The cinnamon pine cones ensure that a lovely scent greets you right from the start. I made this wreath several years ago and still bring it out year after year.

This wreath has a deceptive simplicity. The more you look at it, the more details you discover. There are at least six different types of greenery, and the white stems and red berries tie it all together.

via Cotton Stem

This wreath started out with just greenery and pinecones. I gave it a boost by weaving in strips of burlap and bunches of green berries.

Your wreath doesn't always have to be on the front door. This pinecone-heavy wreath gets lightened up with the addition of snowball ornaments plus gold and burlap ribbons. The window frame turns it into a holiday vignette. This was my absolute favourite wreath display and I miss having a fireplace to decorate.

This wreath goes heavy on the greenery and has a lovely country farmhouse feel. If you're lucky enough to have a wooded area nearby, you can collect your own branches and pinecones.

via Clean & Scentsible

Sometimes a wreath goes through many adjustments before its final incarnation. This one started out as a pool noodle. I loosely wrapped burlap around it like a sock and used it for an autumn wreath. For Christmas, I attached soft garland, pinecones, and ribbon. The final touch was a set of sleigh bells.

One last wreath. I adore this bright and shiny ornament wreath. Buy inexpensive plastic balls so that you don't have to worry about it getting bumped and breaking. Use ornaments with different sheens and textures to give a natural look.

via Sarah Catherine Design

DIY Holiday Tree Wall Shelf

I want to share a Christmas woodworking project with you today - this adorable tree-shaped wall shelf!

My inspiration comes from Jaime Costiglio, and her inspiration came from Pottery Barn Kids - apparently you could buy something similar a few years ago for $79! Mine cost a whopping $7 for the hooks because I used discarded pallet wood plus stain that I already had in my stash.

The plans can be found on Ana White's site - she has excellent drawings that show more than my photos can.

Here is the cut list, directly from her site:

TRUNK
1 - 1x4 @ 16-1/4" 

2 - 1x4 @ 3-1/2" 

MAIN TREE

1 - 1x4 @ 18-3/4" longest point to longest point both ends cut at 25 degrees off square

6 - 1x4 @ 7-1/2" long point to short point, both ends cut at 25 degrees off square

1 - 1x4 @ 15-1/8" longest point to longest point both ends cut at 25 degrees off square

1 - 1x4 @ 11-3/8" longest point to longest point both ends cut at 25 degrees off square

TREETOP

1 - 1x4 @ 7-3/4" long point to long point, both ends cut at 30 degrees off square

1 - 1x4 @ 8-5/8" long point to long point, both ends cut at 30 degrees off square

1 - 1x4 @ 9-1/2" long point to long point, both ends cut at 30 degrees off square

Scrap 1/2" plywood for filling in second shelf approximately 6" x 15"

You will also need:

1-1/4" brad nails and nailer (air nailer), or screws and a drill/driver
3 hooks
wood stain or paint


I usually cut and assemble as I go, just to make sure it fits together. But this time I made all my cuts first, and these measurements were spot on.

Start your assembly from the bottom, attaching the two side supports of the "trunk" to the back. The supports attach to the outside edges of the back piece, not to the front of it (A mistake I made the first time. Because of this I had to cut down the supports as they stuck out the front.)

You then build upwards, starting with the longest board for the main tree. Nail or screw it directly on top of the three-sided trunk you've built already. Follow this with two angled side boards, attached to the long board on the outer edges.

Then the middle board, two sides, the top board, and two more sides.

The treetop fits together kind of like a puzzle. I'm going to refer you to Ana's drawing again.

The final step before hanging is to attach a thinner piece of wood to the back to give you a place to mount it to the wall. I took a thin strip of scrap wood - about the size of a paint stirrer, put it across the back of the tree, traced the angles, and cut it to size. I then attached it to the tree with brad nails.

I stained the tree shelf with Minwax's Provincial stain and a soft cloth. I might also wax it but I haven't decided yet.

And there's your tree! Attach your hooks along the face of the trunk with 1/2" screws.

The decorations I used were scrounged from the ornament boxes. The two little trees were made from scraps from another project. I made them back when I was afraid of the power tools and just put them together with hot glue! The pine cones are from our property - the top one has glitter on it and is from this mantel project.

I can't decide if I'm going to hang our stockings from this shelf. But with six of us and only three hooks, there might have to be some sharing going on. Maybe I should build another shelf!